Microcom 470 - Manual (Page 78)

Loading Graphic Images Chapter 6
))))))))))))))))))))))))))))))))))))))))))))
))))))))))))))))))))))))))))))))))))))))))))
470 Operators Manual 70
6.3 GRAPHIC IMAGE COMMAND SUMMARY
The following commands refer to the use of graphic images:
^A ^D Command
XX 71 Clear Single Non-Volatile Graphic Image from Non-Volatile User Memory:
This command will clear a single non-volatile saved graphic file (1-16) and open
the slot for a new graphic.
XX 101 Load Graphic Image into Non-Volatile User Memory: ^A select which volatile
slot to place the image in (1-16).
XX 102 Load Graphic Image into Volatile User Memory: ^A select which volatile slot
to place the image in (1-16).
XX 109 Delete Single Graphic Image from Volatile User Memory: ^A selects which
slot (1-16) to erase.
116 Send Volatile User Memory Available: The printer will send the number of free
bytes to the serial port (i.e. >327680<).
117 Clear Volatile User Memory: ^A selects which sections of memory to clear.
0 Clear all volatile user memory
1 Clear only graphic images in volatile user memory
2 Clear only downloadable fonts in volatile user memory
118 Read Volatile User Memory: The 470 will send the contents of the volatile
(320KB) user memory to the serial port.
0 Send list of graphic images and downloadable fonts in volatile user memory
1 Send list of graphic images in volatile user memory
2 Send list of downloadable fonts in volatile user memory
119 Read Non-Volatile User Memory: The 470 will send the contents of non-
volatile 192KB user memory to the serial port.
0 List format files, graphics images and fonts in non-volatile user memory.
1 List format files in non-volatile user memory
2 List graphic images in non-volatile user memory
3 List downloadable fonts stored in non-volatile user memory