Microcom 470 - Manual (Page 16)

Basic Operation Chapter 2
))))))))))))))))))))))))))))))))))))))))))))
))))))))))))))))))))))))))))))))))))))))))))
470 Operators Manual 8
Keypad Layout
Figure 4
2.4.1 PRINT/PAUSE KEY
The front panel keypad (see Figure 4) contains a label 'PRINT/PAUSE' key. If this key is
pressed the unit will print the currently loaded label format or the default label if no format has
been loaded. If the printer is in the process of printing a predetermined quantity of labels (see
^D73, section 5.3), pressing the 'PRINT/PAUSE' key will pause the printer. Pressing the key
again will allow the printer to continue the batch.
If the 'PRINT/PAUSE' key is depressed when the power is turned on, the printer is put into test
mode and a statistics and test label will be printed (see ^D29 chapter 5.3.10).
2.4.2 FEED KEY
Pressing and holding the 'FEED' key will cause the printer to advance until released. This key
can be use to load and align paper stock.