Microcom 470 - Manual (Page 12)

Features and Specifications Chapter 1
))))))))))))))))))))))))))))))))))))))))))))
))))))))))))))))))))))))))))))))))))))))))))
470 Operators Manual 4
1.2 BAR CODES
! Code 39, Interleaved 2 of 5, CODABAR, Code 128, Code 93, Plessey, Modified
Plessey, UPC-A, UPC-E, EAN-8, EAN-13, Postnet, and selectable ratios for producing
HIBC, AIAG, and Logmars
! Bar codes may be printed in 0, 90, 180, and 270 degree rotations
1.3 FONTS
! Vector fonts, converted HP LaserJet II™ font compatibility and 18 resident bit mapped
font styles, including OCR-A
! All Bit Mapped fonts expandable in height and width up to 8 times
! Rotated Vector fonts adjustable from 0 to 360 degrees
(Bit Mapped fonts and bar codes in 0, 90, 180, and 270 degrees)
1.4 PRINTING
! Peel function strips label off of backing
! Tag/tear mode advances label to the tear bar
! Batch mode printing
! User defined label advancement for special stock or application
! Label-presence sensor allows printer to dispense at the operator's pace
! Label back-up prevents wasted media in tag/tear and peel modes
! "Epson® Similar" text emulation mode
1.5 INTERFACE COMMUNICATIONS
! Serial: RS-232C, 25-pin female D-Sub connector (DCE) and 2Kbytes buffer
-Flow control: XON/XOFF, CTS
-Baud rate: 300 to 38400, user-selectable
-Parity: odd, even or none
-Data bits: 7 or 8
! Parallel: 36-pin female Centronics® connector and 2Kbytes buffer