Microcom 470 - Manual (Page 113)

Appendix D Quick Reference Command Summary
))))))))))))))))))))))))))))))))))))))))))))
))))))))))))))))))))))))))))))))))))))))))))
470 Operators Manual 105
28 Show Head Size: This function will send the print head dot count to the
communications port. The output is in standard ASCII and will be 640, 768, or
832.
29 Printer Statistics:
0 Print statistics to serial port
1 Print statistics on a label
2 Clear the printed labels variable in the statistics
3 Clear the printed inches variable in the statistics
30 Change Clock: Use the sequence below to set the time and date of the
optional real-time clock:
^D30 (return)
HH:MM:SS (return)
DD/MM/YY/W (return)
31 Show time: The printer will respond by sending the current time to the
communications port. The output is standard ASCII and in the format;
Hours,Min,Sec.
For example: 12:38:59
32 Soft Reset: Restores printer to power-up settings. Also used to set the battery
backed ram fields in memory. Section 5.3.
33 Display Model and Revision Number.
34 Automatic Daylight Savings Time Adjustment:
0 Disable
1 Enable
35 Contrast Window Adjust: A value from 60 to 140 in increments of 1.
XX 36 Adjust Contrast Base: A battery backed ram command. The ^AXX is between
10 and 200%. Section 5.3. This command should only be used to
adjust/calibrate head base contrast differences between printers. Use ^D35 in
normal use.
37 Check Voltages: This command will send the current power supply voltages
and head temperature measurements to the communications port.
38 Epson® Similar Emulation:
1 40 column Epson® similar emulation (2 inch)
2 80 column Epson® similar emulation (4 inch)