Microcom 466 User Manual
Page 92

Quick Reference Command Summary
Appendix B
466 Operators Manual
86
40
Clear Commands 41-51.
XX
41
Load number of fields in layout (HFM): Preceded by ^A.
XX
42
Load label width in dots (LXS): Preceded by ^A.
XX
43
Load label height in dots (LSY): Preceded by ^A.
XX
44
Load web size in dots (WEB): Preceded by ^A.
XX
45
Load gap size in dots (GAP): Preceded by ^A.
XX
46
Load print speed (DPS): Preceded by ^A.
XX
47
Load label control byte (LCB): Preceded by ^A.
XX
48
Load number of steps to activate gap detector (AGD): Preceded by ^A.
XX
49
Load number of steps past gap (SPG): Preceded by ^A.
XX
50
Load X direction offset (OFX): Preceded by ^A.
XX
51
Load Y direction offset (OFY): Preceded by ^A.
XX
54
Send Saved Format File to Serial Port: ^A selection which one (1-128).
Section 5.3.6.
XX
55
Select Default Label Layout: Select from the ROM power-up layouts. ^AXX
ranges from 1 to 8.
56
Select User Defined Layout: Signals to the printer the end of the label fields
and precedes the text fields in a format file.
57
Enter Label Format Mode: This tells the printer that information for a label is
following.
XX
58
Process Saved Format: ^A selects which one (1-128). Section 5.3.6.
XX
59
Save Format File: ^A selects which one (1-128). Section 5.3.6.
60
Clears command 61
XX
61
Mark Text Starting Position: ^A designates which text field to start entering
new data. Section 5.3.8.
62
Pre-padded Text: This command is sent after text that is to appear at the
beginning of each field is sent.