Microcom 466 User Manual

Page 10

Features and Specifications

Chapter 1

466 Operators Manual

1.3

FONTS

Bitmapped fonts (normal/bold and OCR-A and OCR-B)

Converted HP LaserJet™ or TrueType® font compatibility

Fonts can be printed with proportional or non-proportional spacing

All bitmapped fonts expandable in height and width

Printable in 0, 90, 180, and 270 degree rotations

1.4

PRINTING

Optional peel function with take up motor and label present sensor

Optional internal rewind

Optional rotary cutter

Batch and tag/tear mode advances label to the tear bar

Label back-up prevents wasted media in tag/tear and peel modes

1.5

INTERFACE COMMUNICATIONS

Serial: RS-232C, 25-pin female D-Sub connector (DCE) and 2Kbytes buffer

-Flow control: XON/XOFF, CTS/RTS
-Baud rate: 110 to 38400, user-selectable
-Parity: odd, even or none
-Data bits: 7 or 8

Parallel (optional): 25-pin female (also includes additional serial port)

1.6

PHYSICAL

Rigid painted steel construction

Height: 12" (304.8mm)

Width: 11" (279.4mm)

Depth: 18" (457.2mm)

Weight: 40 LBS (18.14Kg)

1.7

ENVIRONMENT

Temperature: 0

C to 40

C operating

Humidity: 10-85% non-condensing