Microcom 466 - Manual (Page 25)

Chapter 4 Designing Labels Using LDS
466 Operators Manual 19
4.0 OR 800 DOTS LSX
3.0 OR 600 DOTS LSY
FEED DIRECTION
X BEGINNING
.0625
Y BEGINNING
THIS IS 0,0
THIS IS THE WEB VALUE
OR 12 DOTS
THIS IS THE GAP VALUE
OR 25 DOTS .125
MICROCOM
4.4 LABEL HEADER
The header consist of twelve parameters. These parameters contain information about the label.
It is not necessary to enter information for all of the parameters: If a parameter is left blank, then
the default value will be used. A carriage return must follow the label header parameters.
The value of measurement for many of the header elements is the dot. There are 203 dots per
inch on a 466 print head (8 dots/mm). There is a maximum 832 dots in the X direction (width). The
Y direction (length) is virtually unlimited.
Most header parameters can be supplied using the auto-size command. (See section 5.3.3.)
Below is a list of the header element mnemonics and their default values:
HFM,LSX,LSY,WEB,GAP,DPS,LCB,AGD,SPG,OFX,OFY,,,FMT
0,832,614, 13, 24, 35, 0, 1,490, 0, 0,,, 0
Label Header Parameters of a 4" X 3" Label
Figure 9