Microcom 466 User Manual
Page 90
Quick Reference Command Summary
Appendix B
466 Operators Manual
84
^A
^D
COMMAND
24
Change SW4: Change software switch bank #4.
12345678
^ABxxxxxxxx
*******.)))))),
******.)))))),*
*****.)))))),**
****.)))))),***
**** 0000 = Not decoded (8 bit)
**** 0001 = Danish (7 bit)
**** 0010 = 860 (8 bit)
**** 0011 = Spanish (7 bit)
**** 0100 = 850 (8 bit)
**** 0101 = German (7 bit)
**** 0110 = 865 (8 bit)
**** 0111 = Swiss (7 bit)
**** 1000 = 852 (8 bit)
**** 1001 = French (7 bit)
**** 1010 = 863 (8 bit)
**** 1011 = Swedish (7 bit)
**** 1100 = 437 (8 bit)
**** 1101 = Italian (7 bit)
**** 1110 = British (7 bit)
**** 1111 = US English (7 bit)
****
***.)))))) 1=Auto-size on Power-up, 0=Disable
**.))))))) 1=Blow-hole Sensing Enable, 0=Disable
*.)))))))) Always 0
.))))))))) 1=Enable Slashed Zeros, 0=Disable
^A
^D
COMMAND
25
Change SW5: Change software switch bank #5.
12345678
^ABxxxxxxxx
*******.) 1=XON/XOFF Enable, 0=Disable (COM2)
******.)) 1=8 Data Bits, 0=7 Data Bits (COM2)
*****.))) 1=Echo Enable, 0=Disable (COM2)
****.)))) 1=No Parity, 0=Enable Parity (COM2)
***.))))) 1=Odd Parity, 0=Even Parity (COM2)
**.)))))) 1=Ignore Control Codes, 0=Accept (COM2)
*.)))))))))),
.)))))))))),* Status Message Format (COM2)
00 = Control Codes
10 = Text Equivalent
11 = ^ Equivalent