Microcom 322M - Manual (Page 19)

322M Operator’s Manual
15
Chapter 3: Getting Started
3.1 Unpacking and Inspection
The printer has been packaged to help reduce the damage that may occur during the
shipment of product.
Inspect the shipping container(s) for signs of damage. If damage is evident, contact the
shipping company immediately to file a damage claim.
After the printer is removed from the container(s), verify that all the parts purchased are
present and in good condition (see Figure 3).
The packaging material and shipping container(s) should be kept and used if the printer is to
be shipped. Additional shipping materials can be ordered by contacting the Microcom
Corporation Service Department.
Figure 3 Typical Printer Accessories
3.2 Connecting the Printer
Refer to Figure 4 for proper connections.