Microcom 322M - Manual (Page 104)

Quick Reference Command Summary Appendix C
100
322M Operator’s Manual
^A ^D COMMAND
21 Software Switch #1: A non-volatile command used to set the various
functions identified below.
^AB12345678
*******.))) 1 = Enable XON/XOFF ; 0 = Disable
******.)))) 1 = 8 Data Bits ; 0 = 7 Data Bits
*****.))))) 1 = Enable Echo ; 0 = Disable
****.)))))) 1 = Disable Parity (NONE) ; 0 = Enable Parity
***.))))))) 1 = Odd Parity ; 0 = Even Parity
**.)))))))) 1 = Ignore Control Codes ; 0 = Accept
*.)))))))))),
.)))))))))),*
** Enquiry Responses
00 = Control Codes
10 = Text Equivalent
11 = ^ Equivalent
22 Software Switch #2: A non-volatile command used to set the various
functions identified below.
^AB12345678
*******.)))))))),
******.)))))))),*
*****.)))))))),**
***** *** Power-up Label Formats
***** 000 = No Power-up Format
***** 001 = ROM or Saved Format File 1
***** 010 = ROM or Saved Format File 2
***** 011 = ROM or Saved Format File 3
***** 100 = ROM or Saved Format File 4
***** 101 = ROM or Saved Format File 5
***** 110 = ROM or Saved Format File 6
***** 111 = ROM or Saved Format File 7
*****
****.))))))))) 1 = Use Saved Format File ; 0 = ROM Format
***.)))))))))) 1 = Enable Print Button ; 0 = Disable
**.))))))))))) 1 = Disable Button ; 0 = Enable
*.)))))))))))) 1 = Enable >RESTARTED< Response ; 0 = Disable
.))))))))))))) 1 = Enable Clear Text ; 0 = Disable