Microcom 226 Users Guide User Manual
Page 25
Chapter 4
Printer Modes
226/426 User’s Guide
15
Byte Mode
Responses
(ASCII Hex)
Text and Verbose Mode Responses
Definition
0x81
>READY<
The printer is in ready to receive
data.
0x82
>BUSY<
The printer is currently busy.
0x83
>PAUSED<
The printer has been paused.
0x84
>PRINTING<
The printer is currently printing.
0x85
>FEEDING<
The printer is currently feeding
media.
0x86
>LABEL/TAG PRESENT<
Media has been presented in a
dispense mode.
0x87
>STOCK ADVANCED<
The media has been advanced.
0x8A
>FLASH DEFRAGMENTING<
Flash file system is optimizing
memory.
0x8F
>STOCK NOT LOADED<
The printer was powered up with
out media installed.
0x90
>RETRACTION DELAY<
The retraction has been
delayed.
0x91
>PRINT DELAY<
The printing has been delayed.
0xB0
>FLASH MEMORY LOW<
The Flash memory file space is
95% full.
0xC0
>BUTTON 1 TAPPED<
The print button has been
pressed.
0xC1
>BUTTON 1 HELD<
The print button has been held.
0xD0
>TEMPERATURE OUT OF RANGE<
The print head temperature is
out of operating range.
0xD1
>NONEXISTENT COMMAND<
The received command does not
exist.
0xD2
>INCOMPLETE COMMAND<
The received command is not
complete.
0xD3
>ZIP FILE ERROR<
The received Zipped file has an
error.
0xD4
>FILE CONVERSION ERROR<
The file was not converted
properly.
0xD5
>UNSUPPORTED FILE TYPE<
The received file is not
recognized.
0xD6
>FILE NOT FOUND<
The requested file does not exist
or cannot be found.