Microcom 226 Users Guide - Manual (Page 17)

226/426 User’s Guide
7
Chapter 3: Getting Started
3.1 Unpacking and Inspection
The printer has been packaged to help reduce the damage that may occur during the
shipment of product.
Inspect the shipping container(s) for signs of damage. If damage is evident, contact the
shipping company immediately to file a damage claim.
After the printer is removed from the container(s), verify that all the parts are present and in
good condition (see Figure 3).
The foam and shipping container(s) should be kept and used if the printer is to be shipped.
Additional shipping materials may be ordered by contacting the Microcom Corporation
Service Department in the event the printer needs to be shipped at a later date and the
original packaging materials were not saved.
Figure 3 Standard Printer Accessories