Microcom 226 Users Guide User Manual
Page 24
Printer Modes
Chapter 4
14
226/
426 User’s Guide
Byte Mode
Responses
(ASCII Hex)
Text and Verbose Mode Responses
Definition
0x01
>STOCK OUT<
Out of Media
0x02
>STOCK OVERADVANCED<
Excess media past LPD
preventing a TOF operation.
0x03
>STOCK JAMMED<
Media is jammed.
0x04
>INCORRECT STOCK<
Problem encountered trying to
realign media.
0x06
>OK<
ACK message used with the
^D726)1 command.
0x10
>CUTTER JAMMED<
The cutter has jammed.
0x11
>CUTTER INOPERATIVE<
The cutter is not detected
0x12
>CUTTER WATCHDOG STOPPED
CUTTER<
The software shut the cutter off
for safety issues.
0x13
>CUTTER WATCHDOG
WON’T RESET<
The software cannot reset the
cutter after a stopped condition.
0x15
>OPERATION FAILED<
The operation failed to execute
properly.
0x1C
>MISSING LABEL<
Generated if more than one die-
cut label has been detected.
0x1D
>INCOMPLETE FORM<
A complete script did not print on
a >STOCK OUT< condition.
0x20
>CATCH TRAY FULL<
The PMH has reached its
capacity.
0x21
>INPUT 1<
The Input 1 sensor has been
actuated.
0x22
>INPUT 2<
The Input 2 sensor has been
actuated.
0x30
>SCRIPT ERROR<
An error with the script has been
detected.
0x31
>INVALID PARAMETER<
The printer has detected an
invalid parameter.
0x32
>PARSER ERROR<
An error with the printer’s parser
has occurred.
0x40
>COMM ERROR<
A Communication error has
been detected.
0x51
>FLASH ERROR<
The flash memory has
encountered an error.
0x80
>RESTARTED<
The printer has been powered
on or the power has been reset.