Microcom 226 Users Guide - Manual (Page 13)

226/426 User’s Guide
3
Chapter 1: Printer Specifications
1.1 General Specifications
Width 226 -
6.6” (167mm); 426 - 8.5” (216mm)
Height 226 - 6.9” (175mm); 426 - 6.9” (175mm)
Depth 226 - 4.8” (122mm); 426 - 4.8” (122mm)
Weight 226 - 6 lbs (2.7kg); 426 - 7.8 lbs. (3.5kg)
Electrical Auto-sensing 120/230 VAC ; 50-60 Hz
4 Amps maximum
Temperature 40° F – 77° F (5° C – 25° C) Operating
Humidity 10% – 85%, non-condensing
SRAM Memory 16MB
Flash Memory 4MB
Agency Approvals CUL, CE, and complies with FCC Class A.
Interface Communications
RS-232 Serial Network Connectivity
RS-232, 9 pin D-Sub connector (DCE) 10BASE-T
Flow Control: XON, XOFF, and CTS Hosts: Windows® NT, 95, 98, and 2000
Parity: Odd, Even, and None Protocols: TCP/IP
Data Bits: 7 or 8
Table 1 General Specifications
1.2 Printing Specifications
Print Type Direct Thermal
Print Resolution
203 DPI (8 dots/mm)
300 DPI (11.808 dots/mm)
– option on 426 only.
Maximum Print Speed
6”/sec. (152mm/sec.)
4”/sec. (102mm/sec.) with optional 300 DPI
Maximum Print Width
226 - 2.205 inches or 448 dots (56 mm)
426 - 4.1 inches or 832 dots (104mm)
426 - 4.26 inches or 1280 dots (108mm) with 300 DPI
Print Length
50” (1270mm) using standard memory
25” (635mm) with optional 300 DPI print head
Table 2 Printing Specifications