Metz MECABLITZ 58 AF-2 digital Canon User Manual

Page 141

141

19.1 Switching the remote flash mode on and off

• Press the

key repeatedly until "Select" appears

on the display.

• Use the

and

keys to select "Remote" from

the menu. The selected menu option will be indicated
by a dark bar.

• Press the

key to confirm the selection of

"Remote".

• Use the

and

keys to select "Remote

Master"

for master operation, "Remote Slave"

for slave operation, or "Remote OFF" to deactivate
remote flash mode.
The setting is effective immediately.

• Press

repeatedly to return the display to its nor-

mal reading. If the

key is not pressed, the display

will switch back to normal automatically after appro-
ximately 5 seconds.

Set

Sel

19.2 Settings on the master flash unit

Slave groups A and B are always activated. They cannot be deactivated.
The master flash unit M and slave group C can be activated or deactiva-
ted, however. If the master flash unit is deactivated, it only controls the
slave units and does not contribute to exposing the shot

The

key can be used to sequentially access the settings for the master flash

unit M and the slave flash units in groups A, B, and C.
Canon E-TTL remote
Adjusting the settings for slave group A

• Press the

key repeatedly until "A" (for slave group A) appears on the LC

display.

• While A is displayed, press the

key repeatedly until TTL (E-TTL remote)

appears in the display next to the A.

• While A TTL is displayed, the

and

keys can be used to adjust the

flash exposure correction value for the slave flash units in group A, from -3 f-
stops (EV) to +3 f-stops (EV) in 1/3 increments.

• Press

to save your settings. If the

key is not pressed, the settings will be

saved automatically after approximately 5 seconds.

Adjusting the settings for slave group B

• Press the

key repeatedly until B TTL (for slave group B) appears on the

LC display.

• While B TTL is displayed, the

and

keys can be used to adjust the

flash exposure correction value for the slave flash units in group B, from -3 f-
stops (EV) to +3 f-stops (EV) in 1/3 increments.

• Press

to save your settings. If the key

is not pressed, the settings will be

saved automatically after approximately 5 seconds.

–

Para

–

Mode

Para

☞

Para

Sel

CH1

TTL

AZoom 28

TTL+

F32

Select

BEEP

Remote

Set

☛

Remote

Master

Set

☛

709 47 0210.A3 58 AF-2 Can 20.06.2011 16:30 Uhr Seite 141