Metz MECABLITZ 50 AF-1 digital Sony - Manual (Page 90)

90
ķ
9.3 Auto OFF for the flash unit
The auto OFF for the flash unit can be set so that it occurs after 10 minutes, 1
minute or is deactivated.
Setting procedure
• Press button combination „Select“ until
the symbol flashes.
• Apply the setting desired with the buttons
+ and –.
– When „10min“ is displayed, Auto OFF
function will be activated after `
10 minutes.
– When „1min“ is displayed, the Auto OFF
will be activated after 1 minute.
– When „OFF“ is displayed, the Auto OFF
is
deactivated.
The setting takes effect immediately.
After about five seconds the display stops flashing and the setting is saved
automatically.
After activation of the auto OFF the display shows .
9.4 Modelling light („ML“)
The modelling light is a high-frequency stroboscopic flash. It creates the impres-
sion of a semi-permanent light for a duration of about 3 seconds. The modelling
light enables the user to assess light distribution and the formation of shadows
before taking pictures. The modelling light is triggered with the manual firing
button
ቤ.
Setting procedure
• Press the button combination „Select“
until „ML“ flashes in the display.
• Apply the setting desired with the
buttons + and –.
– When „ML ON“ is displayed,
the modelling light is activated.
– When „ML OFF“ is displayed,
the modelling light is deactivated.
The setting takes effect immediately.
After about five seconds the display stops flashing and the setting is saved
automatically.
After activation of the modelling light function „ML“ appears in the display.
OFF
ML
☛ ☛
ML
On
ML
☛
On
OFF
10min Ȅ
Ȅ
☛☛
OFF
10min Ȅ
☛
10min
709 47 0202.A3 50AF-1 S 17.12.2010 13:27 Uhr Seite 90