Meinberg SHSPZF LANTIME - Manual (Page 95)

The next section “Satellite Info“ shows information about all the satellites, which are
in view momentarily. The satellite ID, elevation, Azimuth and distance to the receiver
reveal the position of the satellite in the sky. The Doppler shows whether the satellite
is ascending (positive values) or descending (negative value).
Software Update
If you need to update the software of your LANTIME, you need a special file
update.tgz from Meinberg, which has to be uploaded to the LANTIME by using ftp,
SCP or SFTP to the root dir (/update.tgz), after the file transfer is complete, press
“Start firmware update”.
Afterwards you are prompted to confirm the start of the update process. The scope of
the update only depends on the chosen file.
95