Assembly with cn-ub/e, Antenna short-circuit, No load) and 17 v – Meinberg SHSPZF LANTIME User Manual
Page 21: Connected gps antenna). 21, Antenna short-circuit disconnect power
Assembly with CN-UB/E
Type N / BNC
male
Type N
male
Type N
male
CN-UB/E
1.5m max.
Type N
male
GPS167
Antenna
Meinberg
GPS
As short as possible!
Antenna Short-Circuit
In case of an antenna line short-circuit the following message appears in the
display:
ANTENNA
SHORT-CIRCUIT
DISCONNECT POWER
!!!
If this message appears the clock has to be disconnected from the mains and the
defect eliminated. After that the clock can be powered-up again. The antenna supply
voltage must be in a range of 18.5 V
DC
(no load) and 17 V
DC
(connected GPS
antenna).
21
This manual is related to the following products: