Meinberg SHSPZF LANTIME - Manual (Page 30)

The menus in Detail
Root Menu
The root menu is shown when the receiver has completed initialisation after power-
up. The left side of the first line of the display shows the receiver’s mode of operation
as described above. The text "NORMAL OPERATION" might be replaced by
"COLD BOOT", "WARM BOOT" or "UPDATE ALMANAC". If the antenna is
disconnected or not working properly, the text "ANTENNA FAULTY" is displayed
instead.
NORMAL OPERATION
NTP: Offs:3ms
Thu, 05.06.2001
MESZ 12:00:00
On the right side of the display the current date, the name of the time zone (as defined
in the setup menu) and local time are monitored. If the "IGNORE LOCK" option is
enabled an "*" will be shown behind the time.
If the NEXT key is pressed from the root menu a submenu is displayed showing the
receiver’s software revision of the LANTIME software and the GPS167 flash
software:
LANTIME:2.00
S/N:10000110
GPS167 :2.06
S/N:10000110
If the NEXT key is pressed twice from the root menu a submenu is displayed showing
the NTP software version, the operating system version and the MAC address of the
integrated net card.
Pressing NEXT the third time the fingerprint of the SSH key is displayed:
Pressing NEXT the fourth time the receiver info is displayed:
RECEIVER INFO
PROUT: 0 NCOM:2
SYNTH: n/a
TCXO_LQ gps167_3
30
1024 8c:2c:72:5e
:9b:5b:10:83:c9:
c8:eb:7d:49 tim
eserver
NTP:4.0.99f
OS:2.2.14.01
MAC:000000000000
Meinberg