Technical specifications gps167 – Meinberg SHSPZF LANTIME User Manual
Page 112
Technical Specifications GPS167
RECEIVER:
6 channel C/A code receiver with external antenna/converter unit
ANTENNA:
Antenna/converter unit with remote power supply refer to chapter
"Technical Specifications GPS167 Antenna"
ANTENNA
INPUT:
Antenna circuit dc-insulated; dielectric strength: 1000 V
Length of cable: refer to chapter "Mounting the Antenna"
LC DISPLAY:
1HE: 2 x 40 character, menu selectable by push buttons and light
BGT: 4 x 16 Zeichen, menu selectable by push buttons
TIME TO SYN-
CHRONIZATION:
One minute with known receiver position and valid almanac
12 minutes if invalid battery buffered memory
PULSE
OUTPUTS:
Change of second (P_SEC, TTL level)
Change of minute (P_MIN, TTL level)
ACCURACY OF
PULSES:
Better than ±250 nsec after synchronization and 20 minutes of
operation
Better than ±2 µsec during the first 20 minutes of operation
FREQUENCY
OUTPUTS:
10 MHz (TTL level)
SERIAL PORTS:
3 asynchronous serial ports (RS-232)
COM0:
fixed, internal used
COM1:
fixed, internal used
COM2+3:
configurable, sending Standard Meinberg
Time String (once per second or per minute)
POWER
REQUIREMENTS: 5 V ± 5 %, @ 700 mA
PHYSICAL
DIMENSION:
Eurocard, 100 mm x 160 mm
REAR EDGE
CONNECTOR:
According to DIN 41612, type C 64, rows a+c (male)
RF CONNECTOR:
Coaxial SMB connector (male)
AMBIENT
TEMPERATURE:
0 ... 50 °C
HUMIDITY:
85 % max.
112