Measurement Computing STLITE-CPCI-xxx - Manual (Page 21)

17
STLITE-CPCI-16R, STLITE-CPCI-16R+, STLITE-CPCI-8R, , STLITE-CPCI-8R+
Typical for 25°C unless otherwise specified.
Features
Slots STLITE-CPCI-16Rx: Sixteen 3U CPCI slots
STLITE-CPCI-8Rx: Eight 3U CPCI slots
PCI Bus Embedded industry standard bridge, Intel 21150-AC
32 bit, 33 MHz.
Power Supply 250W ATX Style
Line Voltage Input 115VAC/10A or 230VAC/5A, switch-selectable, 50/60Hz
Volts Minimum
Load Maximum
Load Tolerance Power 1
+3.3V 2 0.2 Amps 14 Amps ±10% 46W
+5V 2.0 Amps 5 27 Amps ±5% 135W
+12V
3,4
0.2 Amps 9 Amps ±5% 108W
−
12V 0.0 Amps 0.5 Amps ±10% 6W
Power Ratings
(1) Total Power not to exceed 250W
(2) Backplane circuits consume 730 mA from the +3.3V supply.
(3) The system monitoring hardware consume 40 mA from the +12V supply.
(4) The optional fan tray with 4 fans consumes 500 mA (typical) from the +12V
supply.
(5) For some ATX power supplies, if the minimum load is not drawn from the +5V
supply, the
−
12V supply may be out of tolerance.
Certification UL
CE
CSA
FCC Class A Approved
Interface Connector Shielded 80-pin SCSI D-type. Interfaces with Measurement Computing Satellite
Series bus expansion products.
Interface Cable STLITE-C-3. Three-foot shielded ribbon, 80-pin, D-type.