Measurement Computing PC-CARD-DAS16/330 - Manual (Page 15)

PC-CARD-DAS16/330 User's Guide Installing the PC-CARD-DAS16/330
C50FF-x
The red stripe
identifies pin # 1
50-pin female
IDC connector
50-pin female
IDC connector
1 2
49 50
2
50
1
49
Figure 8. C50FF-x cable
Details on the C50FF-x cable are available on our web site at
www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=104&pf_id=136 .
Field wiring and signal termination
You can use the following cabling, screw termination, and signal conditioning products with the CPCC-50F-39
cable, or with the CPCC-50M-4 and C50FF-x cables:
ƒ CIO-MINI50 – 50-pin screw terminal board. Details on this product are available on our web site at
www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=102&pf_id=258 .
ƒ SCB-50 – 50 conductor, shielded signal connection/screw terminal box provides two independent 50-pin
connections. Details on this product are available on our web site at
www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=196&pf_id=1168 .
ƒ ISO-RACK-16/P – 16-channel, 5B module rack. Details on this product are available on our web site at
www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=127&pf_id=1111 .
Information on signal connections
General information regarding signal connection and configuration is available in the Guide to Signal
Connections (available at
www.mccdaq.com/signals/signals.pdf) .
Calibrating the PC-CARD-DAS16/330
The PC-CARD-DAS16/330 features auto-calibration with InstaCal. Calibration coefficients for each range are
stored on board in nonvolatile RAM. The normal calibration interval is once per year.
15