Measurement Computing PC-CARD-DAS16/330 - Manual (Page 14)

PC-CARD-DAS16/330 User's Guide Installing the PC-CARD-DAS16/330
Caution! Do not exceed input specifications. There are no socketed or user-serviceable parts in the PC-
CARD-DAS16/330. Check the specifications and input voltages before connecting any signals.
Note
Digital signals should not be grounded to an analog ground (AGND) pin. Use the cable shield or a digital
ground (DGND) pin.
CPCC-50F-39
50-pin female IDC connector.
50 49
2 1
Dot
50-pin micro connector.
Connect to the I/O connector
on the PC-CARD
with the dot facing UP.
Key
50
1
Figure 6. CPCC-50F-39 cable connections
Details on the CPCC-50F-39 cable are available on our web site at
www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=105&pf_id=1379 .
CPCC-50M-4
If your application requires a cable that is longer than one meter in length, use the CPCC-50M-4 four-inch
cable, and connect to a C50FF-x cable.
50-pin male IDC connector.
Connect to a C50FF-x cable.
49 50
1 2
50-pin micro connector.
Connect to the I/O connector
on the PC-CARD
with the dot facing UP.
Dot
50
1
Figure 7. CPCC-50M-4 cable connections
Details on the CPCC-50M-4 cable are available on our web site at
www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=96&pf_id=1380 .
14