Measurement Computing PCIe-DAS1602/16 - Manual (Page 7)

7
Chapter 2
Installing the PCIe-DAS1602/16
What comes with your PCIe-DAS1602/16 shipment?
As you unpack your PCIe-DAS1602/16, make sure that the following components are included.
Hardware
PCIe-DAS1602/16
Documentation
In addition to this hardware user's guide, you should also receive the Quick Start Guide. This booklet provides
an overview of the MCC DAQ software you received with the device, and includes information about installing
the software. Please read this booklet completely before installing any software or hardware.
Optional components
If you ordered any of the following products with your board, they should be included with your shipment.
 Cables
o C37FF-x
o C37FFS-x
o BP40-37
 Signal termination and conditioning accessories
MCC provides signal termination and signal conditioning products for use with the PCIe-DAS1602/16.
Refer to the Field wiring, signal termination, and signal conditioning section for a list of compatible
accessory products.
Unpacking
As with any electronic device, take care while handling to avoid damage from static electricity. Before
removing the PCIe-DAS1602/16 from its packaging, ground yourself using a wrist strap or by simply touching
the computer chassis or other grounded object to eliminate any stored static charge.
If the device is damaged, notify Measurement Computing Corporation immediately by phone, fax, or e-mail.
 Phone: 508-946-5100 and follow the instructions for reaching Tech Support
 Fax: 508-946-9500 to the attention of Tech Support
 Email:
[email protected]
For international customers, contact your local distributor. Refer to the International Distributors section on our
web site at
www.mccdaq.com/International .
Installing the software
Note : Before installing a PCIe-DAS1602/16, install the software you plan to use with the device.
Refer to the Quick Start Guide for instructions on installing the software on the MCC DAQ CD. This booklet is
available in PDF at
www.mccdaq.com/PDFmanuals/DAQ-Software-Quick-Start.pdf .
Configuring the hardware
If you are using the PCIe-DAS1602/16 with its default settings, the board is completely plug-and-play. You can
skip these configuration sections and refer to Installing the hardware.