Measurement Computing PCIe-DAS1602/16 - Manual (Page 14)

PCIe-DAS1602/16 User's Guide Installing the PCIe-DAS1602/16
14
Figure 16. BP40-37 cable
Field wiring, signal termination, and signal conditioning
You can use the following MCC screw terminal boards to terminate field signals and route them into the PCIe-
DAS1602/16 using the C37FF-x or C37FFS-x cable:

CIO-MINI37 – 37-pin screw terminal board

SCB-37 – 37-conductor, shielded signal connection/screw terminal box that provides two independent
50-pin connections
Details on these products are available on our web site at www.mccdaq.com/products/screw_terminal_bnc.aspx .
MCC provides the following analog signal conditioning products for use with the PCIe-DAS1602/16:

CIO-EXP16 - Analog multiplexor expands 16 differential inputs to one single-ended output with multiple
gains and CJC

CIO-EXP32 - Analog multiplexor expands 32 differential inputs to two single-ended outputs (such as two
16 to 1 multiplexers) 2 gain amps and CJC

ISO-5B30-01 - Analog isolation module, voltage/current input, 4 Hz ±10 mV input, ±5 V output
 ISO-RACK16 – Isolated 16-channel, 5B module rack for analog signal conditioning and expansion

ISO-DA02 – Isolated 2-channel, 5B module rack for analog signal conditioning and expansion.
MCC provides the following digital signal conditioning products for use with the PCIe-DAS1602/16:

CIO-ERB08 – 8-channel, Form C relay accessory board for digital signal conditioning

CIO-ERB24 – 24-channel, Form C relay accessory board for digital signal conditioning

SSR-RACK08 – 8-channel, solid-state relay mounting rack for digital signal conditioning

SSR-RACK24 – 24-channel, solid-state relay mounting rack for digital signal conditioning
Details on these analog and digital signal conditioning products are available on our web site at
www.mccdaq.com/products/signal_conditioning.aspx .
37
19
20
1
The red stripe
identifies pin # 1
2
40
1
39
Key