Measurement Computing DAQFlex - Manual (Page 35)

DAQFlex Message-based Firmware Specification Hardware Reference – USB-2001-TC
35
USB-2001-TC
Use the components below to set or get device properties.
Refer to the DAQFlex Software User's Guide for a description of each component and property.
Component Supported
Property/Command Set/Get Supported Values
AI
CJC/format Get CJC/DEGC, CJC/DEGF, CJC/KELVIN
OFFSET Get Floating point numeric
SENSOR Set/Get TC/char
SLOPE Get Floating point numeric
STATUS Get BUSY, ERROR, READY
VALUE Get Unsigned integer numeric
AI{ch} RANGE Set/Get
BIP73.125E-3V (±0.073125 volts)
BIP146.25E-3V (±0.14625 volts)
DEV
FLASHLED/{n} Set 0 to 255
FWV Get Firmware version
ID Set/Get Up to 56 characters
MFGCAL Get yyyy-mm-dd HH:MM:SS
MFGCAL{item} Get YEAR as yyyy; 20xx
MONTH as mm; 01 to 12
DAY as dd; 01 to 31
HOUR as HH; 01 to 23
MINUTE as MM; 01 to 59
SECOND as SS; 01 to 59
MFGSER Get Up to 8 hexadecimal digits
RESET/{value} DEFAULT, SYSTEM
Hardware features
 One analog input channel, numbered 0
 Supports thermocouple types B, E, J, K, N, R, S, and T
 Possible gain ranges:
o ±146.25 mV (not calibrated)
o ±73.125 mV
 1024 bytes of nonvolatile FLASH program memory; used for storing configuration information,
calibration data, and user data.
 This device does not support bulk transfers.