Measurement Computing DAQFlex - Manual (Page 29)

DAQFlex Message-based Firmware Specification Hardware Reference – USB-1608FS-Plus
29
USB-1608FS-Plus
Use the components below to set or get device properties.
Refer to the DAQFlex Software User's Guide for a description of each component and property.
Component
Supported
Property/Command
Set/Get Supported Values
AI RES Get U16
AI{ch}
OFFSET Get 4-byte floating point numeric
RANGE Set/Get BIP10V, BIP5V, BIP2V, BIP1V
SLOPE Get 4-byte floating point numeric
VALUE Get Unsigned integer numeric
AIQUEUE
CLEAR Set
COUNT Get 0 to 7 elements
AIQUEUE{element}
CHAN Set/Get
element: 0 to 7
value: 0 to 7
RANGE Set/Get
element: 0 to 7
value: BIP10V, BIP5V, BIP2V, BIP1V
AISCAN
EXTPACER Set/Get ENABLE/MASTER, ENABLE/SLAVE, DISABLE
HIGHCHAN Set/Get 0 to 7 single-ended
LOWCHAN Set/Get 0 to 7 single-ended
QUEUE Set/Get ENABLE, DISABLE
RATE Set/Get 0.009 S/s to 100 kS/s
RANGE
Set/Get BIP10V, BIP5V, BIP2V, BIP1V
Range{ch}
RESET
Set
SAMPLES Set/Get
0 to N
(0 = continuous scan; N = 32-bit FIFO)
STALL Set/Get ENABLE, DISABLE
START Set
STATUS Get IDLE, RUNNING, OVERRUN
STOP Set
TRIG Set/Get ENABLE, DISABLE
XFRMODE Set/Get BLOCKIO, SINGLEIO, BURSTIO
AITRIG TYPE Set/Get EDGE/RISING, EDGE/FALLING
CTR{ch} VALUE
Get 0 to 4,294,967,295
Set 0
DEV
DATATYPE Set/Get ENABLE, DISABLE
FLASHLED/{n} Set 0 to 255
FWV Get
Firmware version of the device
MM.mm (M = major; m = minor)
ID Set/Get Up to 56 characters
MFGCAL Get yyyy-mm-dd HH:MM:SS
MFGCAL{item} Get YEAR as yyyy; 20xx
MONTH as mm; 01 to 12
DAY as dd; 01 to 31
HOUR as HH; 01 to 23
MINUTE as MM; 01 to 59
SECOND as SS; 01 to 59
MFGSER Get Up to 8 hexadecimal digits
RESET/{value} Set DEFAULT