MEGA Corp. MMP4-2 - Manual (Page 42)

MMP 4-2
5 Nov 2011
SECTION 8
Scheduled Inspections
8-1
DESCRIPTION
This section establishes scheduled maintenance inspections of the MMP-4 at designated frequencies.
Performing these inspections will identify potential system discrepancies and allow preventative
maintenance to be performed before a component or system is rendered totally inoperative.
** NOTE: Units operated in extremely low quality water environments may require more frequent
inspections.
FREQUENCY
STEP
FRAME AND
SUSPENSION
DAILY
BEFORE
TRANSPORT
FIRST
50
MILES
FIRST 200
MILES
SEMI-
ANNUALLY
ANNUALLY
1
Check frame and
suspension for cracks,
damaged or missing
components.
Repair or replace as
required.
X
2
Verify lug nut torque.
(80 to 90 ft/lbs or 110 to
125 Nm)
Re-Torque as
required.
X X X
3
Check tires and wheel
for security, damage,
inflation (80 psi or 550
kpa) and missing parts.
Repair as required.
X
4
Service wheel bearings
with grease. X
5
Remove and repack
wheel bearings.
X
6
Check travel locking
components for
serviceability, damage,
proper installation and
missing parts.
Repair as required.
X