beautypg.com

MEGA Corp. MMP4-2 User Manual

Page 10

background image

MMP 4-2

5 Nov 2011

SECTION 2

MMP-4 Overview

Contents

2-1

Description ……………………………… 2-1
Inspection ……………………………..... 2-1

Repair …………..............………….......... 2-2

DESCRIPTION

The MEGA Mobile Pump is a towable water
lifting station. The MMP 4 may be towed by a
vehicle capable of at least a 6,000 pound (2,725
kg) towing capacity, 1,000 pound (450 kg)
tongue weight and equipped with the
appropriate weight rated Class IV trailer hitch
with a 2 5/16” ball. The MMP 4 can be
transported to a water holding pond and be set
up by 1 individual. MMP 4’s are a self
contained pumping station fitted with a
hydraulically driven 12” axial water pump that
has the potential to lift water 25’ (7.62 meters)
from pump level to fill water distribution
equipment (maximum height, 17’ [5.2 meters]
above ground level). MMP 4’s are equipped
with: hydraulically lifted inlet and discharge
booms with safety retaining chains and travel
locking devices, DOT rated lighting, 16” load
range ‘E’ on-highway trailer tires, a fold away
hitch with safety chains, a vacuum break with
an anti-siphon discharge sock on the discharge
boom, 23 gallon (87 liter) hydraulic oil tank
filled with Chevron Clarity AW 46 hydraulic
oil, a gear type hydraulic pump driven by a
Caterpillar 3054B series diesel engine and a 50
gallon (190 liter) capacity diesel fuel tank
equipped with shut off valves.












The MMP 4 needs a minimum of 2.5’ (0.762
meters) of water above the inlet of the water
pump for proper operation.

INSPECTION

1. Inspect MMP 4 exterior paint for damage

and corrosion.

2. Inspect piping for damage and leaks.

3. Inspect frame, landing gear and suspension

for damage and missing parts.

4. Inspect engine assembly for loose, missing,

damaged or leaking parts.


5. Inspect all hydraulic hoses and couplings

for security, damage and leaking.


6. Inspect fuel, engine oil, anti freeze and

hydraulic oil for contamination and proper
level.

7. Inspect lighting, lug nuts, fenders and hitch

safety equipment for operation, damage and
missing parts.

8. Inspect electrical system for corrosion,

damage and missing parts.

REAR VIEW

TOP VIEW

SIDE VIEW