MEGA Corp. MMP4-2 User Manual
Page 4

MMP 4-2
5 Nov 2011
SECTION 1
Definitions and Abbreviations
Contents
1-1
Warning, Caution & Notes ………………. 1-1
Shall, Will, Should and May ……………. 1-1
Safety Messages ………………………… 1-2
Abbreviations ………………………..… 1-5
MMP 4 General Overview …………….. 1-6
MANUAL USAGE
This
technical
manual
only
contains
information required to safely maintain the
MMP-4 powered by a CAT 3054B diesel
engine. See the CAT 3054B Engine
Maintenance and Operators Safety Manual for
specific engine system information and
maintenance procedures. The exact location of
the hazards and description of the hazards are
reviewed in this section. All personnel
working on or operating the machine must
become familiarized with all the safety
messages.
If your system is not covered in this manual or
are having difficulties please contact the
MEGA Corp. Product Support Group at:
Toll free US 1-800-345-8889
Direct 1-505-345-2661
or visit our website a
for more detailed contact information.
Due to the nature of these processes, ensure
that all safety information, warnings and
instructions are read and understood before any
operation or any maintenance procedures are
performed. This service function takes place
with heavy components and at moderate
heights, ensure proper safety procedures are
maintained when performing this service.
Failure to use and maintain proper safety
WARNING, CAUTIONS AND
NOTES
The following definitions are found throughout
the manual and apply as follows:
Operating procedures and techniques, which
could result in personal injury and/or loss of
life if not carefully followed.
Operating procedures and techniques, which
could result in damage to equipment if not
carefully followed.
Operating procedures and techniques that are
considered essential to emphasis.
USE OF SHALL, WILL, SHOULD AND
MAY
Shall and Will – Used when application of a
procedure is mandatory.
Should – Used when application of a
procedure is recommended.
May - Used to indicate an acceptable or
suggested means of accomplishment.