Dish Network 512 - Manual (Page 98)

Page 93
Control Other Devices with the Remote Control
Control a Tuner or Amplifier
Only the buttons described here control a tuner or audio amplifier. Some of the
buttons described here may not control your tuner or amplifier. Please see the
user’s manual that came with your tuner or amplifier for more information.
AUX Mode Button
You must first set up the remote to control the device. See Set Up the Remote to
Control Devices, beginning on page 85. Then, you must press the AUX mode
button to set the remote to AUX mode. The AUX mode button flashes once to
show you’ve set the remote to AUX mode. Make sure you keep the remote in
AUX mode to use the buttons described here to control your auxiliary device.
Power Button
Press the red, unmarked POWER button to turn the tuner or amplifier on or off.
Mute Button
Press the MUTE button to turn the sound for the AUX device off or on.
Volume Button
Press the VOLUME button to raise (+) or lower (-) the volume of the sound.
Up and Down Arrow Buttons
Use UP and DOWN ARROW buttons to change channels on a tuner or audio
device. Limited mode does not affect any device programmed in AUX mode.
Select Button
The SELECT button works as the INPUT SELECT button for a tuner/pre-