Marantz PS-17 - Manual (Page 43)

33
ENGLISH
GENERAL MALFUNCTION
If the equipment malfunctions, this may be because an electrostatic
discharge or AC line interference has corrupted the information in
the equipment memory circuits. Therefore:
- disconnect the plug from the AC line supply
- after waiting at least three minutes, reconnect the plug to the AC
line supply
- re-attempt to operate the equipment
ERROR MESSAGES
When the display indicates some error messages (e.g. ERROR **),
unplug the power cable immediately. Contact your dealer, nearest
Marantz distributor or the Marantz service center in your area.
Last memory
This unit contains a non-volatile memory called as an
"EEPROM" to ensure that the following data will be retained in
the memory even when the unit's power is turned off.
• input function
• Surround mode
• OSD SET UP
HOW TO RESET THE UNIT
Should the operation or display seem to be abnormal, reset the unit
with the following procedure.
The PS-17 is turned on, press and hold the
A/D e and SRS u
buttons simultaneously for 3 seconds or more.
Remember that the procedure will reset the settings of the function
selector, Surround mode, delay time, etc., to their initial settings.