Marantz SR5008 - Manual (Page 167)

167
Appendix Tips Playback Connections Contents
Front panel Display Rear panel Index Remote
Settings
Manual Setup
Perform when setting the speakers manually or when changing settings
made in Audyssey® Setup.
• If you change the speaker settings after performing Audyssey® Setup, it
will not be possible to select Audyssey MultEQ® XT, Audyssey Dynamic
EQ® and Audyssey Dynamic Volume® (vpage 145, 146).
• “Manual Setup” can be used without changing the settings. Please set
if necessary.
Amp Assign
Select power amplifier usage method to match your speaker system.
2 Assign Mode
Set the assignment mode.
Surround Back (Default) :
Setting for 7.1-channel playback using
surround back speakers.
ZONE2 : Setting to assign the unit’s built-in power amplifier for ZONE2
and output the audio in stereo.
Bi-AMP : Setting to use the front speakers via the bi-amp connection.
Front B : Setting to use the second set of front speakers for playback.
You can switch the speaker to be used as the “Front
Speaker” (vpage 172) between Front speaker A and B.
Front Height : Setting for 7.1-channel playback using front height
speakers.