Playback in zone2, Power volume mute zone2 x – Marantz SR5008 User Manual
Page 129
![background image](https://www.manualsdir.com/files/795906/content/doc129.png)
129
Playback in ZONE2
POWER
VOLUME
MUTE
ZONE2
X
Input source select
buttons
1
Press ZONE2 to switch the zone mode to the ZONE2.
2
Press POWER X to turn on the ZONE2 power.
The ZONE2 power indicator on the display lights (vpage 15).
• Also press input source select button when in standby mode, the
power turns on.
• When POWER X is pressed, ZONE2 turns off.
• Power in ZONE2 can be turned on or off by pressing ZONE2 ON/
OFF on the main unit.
3
Press the input source select button to select the input
source to be played.
The audio signal of the selected source is output to ZONE2.
• In ZONE2, you can select iPod/USB, TUNER, NETWORK, M-XPort
or an input source with an analog audio input connector.
• Turn INPUT SELECTOR after pressing ZONE2 SOURCE on the
main unit to select an input source.
2 Adjusting the volume
Use VOLUME df to adjust the volume.
• At time of purchase, “Volume Limit” (vpage 178) is set to “70
(–10dB)”.
%
• Turn VOLUME after pressing ZONE2 SOURCE on the main unit to adjust the
sound volume.