Lumens Technology VS-LC101 - Manual (Page 35)

34
7.2 System Configuration Operation
7.2.1 Change Host Name
 Go to [System Information]. Change host name, click [Apply] on the
bottom right to apply change.
7.2.2 Change System Time
 Go to [System Information]. Change date and time using NTP service or
manually.
 NTP: Check [NTP Service]. Choose NTP server to change system time to
reflect the server time, select Time Zone, and check Daylight Saving
Time if required. Click [Apply] at the bottom right to apply changes.
 Manually : Check [Manually]. Select the correct date and enter the
correct time in the time fields. Click [Apply] on the bottom
right to apply changes.
7.2.3 Source Setting
Go to [Source Setting] and then [Video Source]. Click on the [images] to set
name/video source/image setting/image port of the image capture input
channel.
 VGA or HDMI can be selected for the image capture source, which is the host
input port VIDEO IN 1 and 2. When either VGA or HDMI is connected, the host
automatically detects and switches to the signal source.
 To connect a network camera, the connection settings in the network
camera must first be set. Refer to 7.2.4 Connect IP Camera for
instructions.