Lumens Technology VS-LC101 - Manual (Page 12)

11
Chapter 5 Instruction for installation
5.1 How to Connect
 Please follow the following instructions to connect your devices.
NO. Function How to connect
1. Power Connect the power cord
2. Image Input Connect the image output cable of the computer with the image
input port (HDMI IN/VGA IN) to establish an HDMI or VGA
connection
Note: Alternative devices can be used to replace the computer as the
image input device, such as cameras or projectors…
3. Image Output Connect HDMI OUT to HDMI of the TV screen
Note: If HDMI is not available on the TV, adapters can be used
according to the specification of the TV
4. Audio In Connect the audio input cable of a line device, such as an
amplifier, mixer, or microphone
5. Audio Out Connect the audio output cable of a line device, such as an
amplifier
6. Storage
Device
Insert a USB or eSATA external hard drive as the storage
device
7. LAN Connect the WAN port to the router and computer to remotely
control the VS-LC101
8. Network
Image Input
Connect an IP camera (e.g. VC-A20P) as the image input
9. Digital I/O Connect the RS232 device