Specifications – LD Systems LAX 8 D User Manual

Page 18

MONO INPUT CHANNELS
Microphone input: electronically balanced, discrete
input configuration.
Frequency response: 10 Hz … 45 kHz, +/-3 dB
Distortion (THD+N): 0,005% @ +4 dBu, 1 kHz
Gain range: 0 dB … 40 dB (MIC)
SNR (Signal to noise ratio): 100 dB
Line input: electronically balanced
Frequency response: 10 Hz … 45 kHz, +/-3 dB
Distortion (THD+N): 0,005% @ +4 dBu, 1 kHz
Gain range: +15 dBu … -25 dBu (LINE)

STEREO INPUT CHANNELS
Line input: asymmetric
Frequency response: 10 Hz … 45 kHz, +/-3 dB
Distortion (THD+N): 0,005% @ +4 dBu, 1 kHz

IMPEDANCES
Microphone input: 3,6 kOhm
All other inputs: 10 kOhm or greater
Tape out: 1 kOhm
All other outputs: 120 Ohm

EQUALIZATION
Hi Shelving: +/-15 dB @ 12 kHz
Mid Bell: +/-12 dB @ 2,5 kHz
Low Shelving: +/-15 dB @ 80 Hz

DSP-SECTION
A/D and D/A converters: 24 Bit
DSP resolution: 24 Bit
Type of effects: Echo, Echo+Verb, Tremolo, Plate,
Chorus, Vocal, Rotary, Small Room, Flanger + Verb,
Large Hall
Presets: 100
Controls: Preset-Selector, Effect Bypass

MAIN MIX SECTION
Noise (Bus noise): Fader 0 dB, channels muted: -100
dBr (ref. +4 dBu)
Fader 0 dB, all input channels assigned and set to
Unity Gain: -90 dBr (+4 dBu)
Max output: +22 dBu (XLR, balanced ); +22 dBu (6.3-
mm jack, unbalanced)
AUX Returns, Gain: OFF … +15 dB
AUX-Sends, max. : +22 d Bu

POWER SUPPLY (AC/AC Adaptor)
Main voltage
USA/Canada 100 – 120 V, ~60 Hz,
Europe 210 – 230 V, ~50 Hz
U.K / Australia 240 V, ~50 Hz
Power consumption: 18 W

PHYSICAL
Dimensions (WxDxH): 352 x 272 x 80/40 mm
Gewicht: 3,4 kg without AC adapter.

Since all our products are constantly controlled and
improved, technical changes are possible without
prior notice.

SPECIFICATIONS:

ENGLISH

DEUTSCH

FRANCAIS

ESP

AÑOL

POLSKI

ENGLISH

DEUTSCH

FRANCAIS

ESP

AÑOL

POLSKI

ENGLISH

DEUTSCH

FRANCAIS

ESP

AÑOL

POLSKI

ENGLISH

DEUTSCH

FRANCAIS

ESP

AÑOL

POLSKI

ENGLISH

DEUTSCH

FRANCAIS

ESP

AÑOL

POLSKI