Kyocera DuraForce Pro - Manual (Page 170)

Cleaning and Drying Procedures 159
Drying Your Phone
CAUTION! If your phone has been submerged in water, for example to use the camera in
Underwater Mode, be sure to remove the back cover and rinse all surfaces of the
phone thoroughly with clean, fresh water before drying.
1. Wipe down all outside surfaces of your phone with a clean lint-free cloth.
2. If not already done, remove the back cover and wipe the back side of the phone and the
inside surface of the back cover.
3. Hold the phone firmly and gently shake it a few times to displace surface water.
4. Pat with a clean dry cloth to remove moisture from speakers, microphones (2), earpiece,
and pressure adjustment hole. Repeat patting each area about 20 times.