Cleaning and drying procedures, Precautions – Kyocera DuraForce Pro User Manual
Page 164
Cleaning and Drying Procedures
153
Cleaning and Drying Procedures
Your phone may be cleaned using a mild dish detergent. It may also be cleaned using alcohol
or sanitizer wipes. Please see the proper procedures below.
Precautions
●
Remove all accessories, such as screen protector, phone case and cover, and strap. For
details, refer to the instructions that came with your accessory.
●
Before cleaning, be sure the headset jack cover, card slot cover, and charger/USB port
cover are closed firmly to maintain the waterproof capability.
●
Kyocera has tested cleaning products and determined they will not damage the surfaces
of the phone when used properly. A table containing these products can be found at the
end of this section. See
●
Never apply or spray alcohol directly on the phone as it can lead to damage of the
coating and could affect its waterproof capability.
●
Never pour liquid detergent directly onto the phone as this may affect the sound quality.
If your phone is exposed to a concentrated liquid detergent, rinse it immediately with
fresh water.
●
Do not expose your phone to water at high pressure, and avoid immersing the phone in
water for more than 30 minutes to maintain the waterproof capability.
●
Clean by hand only. Do not use a hard brush or sponge as this may damage the surface
of the phone and affect phone’s waterproof capability.
●
Do not use a washing machine, ultrasonic cleaner, or dishwasher. Doing so may
damage the phone and affect the waterproof capability.
●
Remove all jewelry to avoid scratching the surface of the phone.
●
Do not attempt to clean your phone in extreme cold or hot conditions. Water can
penetrate the phone during a rapid temperature change. If the phone has been exposed
to extreme temperatures, allow it to return to room temperature before cleaning.