Kyocera DuraForce Pro - Manual (Page 147)

Settings 136
To unlock the screen with Password:
► Enter the password and tap on the locked screen.
Disable the Screen Lock
1. From the Home screen, tap Apps > Settings > Lock screen > Security type.
2. Confirm your pattern, PIN, or password.
3. Tap None or Swipe.
4. Read the confirmation message and then tap YES, REMOVE.
Fingerprint
Enabling this option requires you to touch the fingerprint sensor to unlock the screen.
Note: Please remove the USB cable prior to registering your fingerprint for authentication.
Note: If you fail fingerprint authentication five times, input your backup PIN, pattern, or
password.
Note: Fingerprint cannot be used to unlock the screen after restarting the phone. You must use
your backup method, such as pattern, PIN, or password.
Note: The fingerprint sensor is on the Power key. Before using the Fingerprint sensor, make
sure the Power key and your finger are clean and dry.
Note: The fingerprint recognition performance depends on your usage. The phone may have
an issue in registering or recognizing fingerprints that have scars or worn down ridges,
or if you have scratches on the sensor surface.
Tip: To improve fingerprint recognition performance, register the fingerprints that are used
most often to perform tasks on the phone.
1. From the Home screen, tap Apps > Settings > Lock screen > Fingerprint.
2. Read the message and tap CONTINUE.
3. Select your backup screen lock method.
4. Read the message and tap NEXT.
5. Touch the tip of your finger on the sensor and lift after you feel a vibration. Repeat it 20
times.
6. If required, name the fingerprint and tap DONE.