Hytera TC-580 - Manual (Page 38)

Add a channel: select “CH - -” -> press ->
select “RX Freq” -> press -> enter the RX frequency
(see Inputting a Frequency on page for the method to
input a frequency) -> press
. Then the channel will
be added successfully.
Edit parameters: select an existing channel -> press
-> press / to select the option to set ->
press to set. Available parameters are:
RX Freq
To set the RX frequency for the current channel.
Operations:
. Press , and then enter the RX frequency.
■
. Press to save it.
TX Freq
To set the TX frequency for the current channel.
Operations:
. Press , and then enter the TX frequency.
. Press to save it.
RX CTC/CDC
You can set RX CTCSS/CDCSS signaling to CTC/CDC
None, CTC, Normal CDC, or Invert CDC, and you can
also customize the signaling. Operations:
. Select RX CTC/CDC -> press -> press
/ to select the desired signaling type -> press
to customize the signaling.
. Press to save the signaling.
■
■
Note: You must enter a valid RX frequency to
add a channel.
Manual Program