Hytera TC-580 - Manual (Page 27)

channel, the LCD will display ; if it stays on
Priority Channel , the LCD will display .
 If the Talk Back feature is enabled by your dealer,
press the
PTT to reply when the radio stays on a
certain channel.
 You can scan the frequently used Priority Channel
(only one Priority Channel allowed). When staying
on a non-priority channel, the radio will keep
detecting activities on the priority channel. Once
any activity is detected, it will jump to the priority
channel immediately. For more information,
please contact your dealer.
. T o e x i t t h e s c a n n i n g p r o c e s s ,
p r e s s t h e S c a n k e y a g a i n ; o r
select “Off?” from the menu “Scan”, and press
to confirm. When exiting from Scan mode, the radio
will also sound an alert tone (programmed by your
dealer) and the icon disappears.
Methods to Exit Scanning
Besides the above methods, you can exit scanning in
the following ways:
 Switch to a channel where Auto Scan feature is
not enabled;
 Press one of the programmed Call1-Call5 keys;
 Select a target contact from the menu “Call List”,
and press
PTT;
 Enable the Emergency function;
 Turn the radio off.
Note:
 During scanning, the following functions
can not be enabled: Power Adjust, Com-
pandor, Scrambler, Whisper, Talk Around
and Keypad Mode Switch.
 To ensure a quick scan, the adjacent chan-
nel spacing should not exceed 0MHz.
Functions and Operations