Hytera TC-580 - Manual (Page 13)

7
Before Use
Charging the Battery
Use only the charger and battery specified by Hytera.
Charger LED can indicate the charging process.
Charge Diagram
Procedures
. Connect the power adapter to AC source. See
arrow .
■
. Plug the power adapter into the rear socket of the
charger. See arrow .
. Place the radio with the battery attached, or the
battery alone, into the charger. See arrow .
. The charging process initiates when LED glows red,
and is completed when LED glows green.
Charge Indicator
LED Indicator Charge Status
LED solidly glows red. Charging
LED solidly glows
orange.
90% charged
LED solidly glows
green.
Idle or charge completed
When battery power runs low, the LED will flash red, and
the low-pitched tone will sound periodically. In this case,
please replace or charge the battery.
Note: To achieve optimal battery performance,
please charge the battery for 5 hours
before initial use.