Authentication process – Kanguru RocIT Defender User Manual

Page 5

ROCIT DEFENDER™

USER’S GUIDE

Page 5

keys such as , , or , ) to press on the keyboard in order to
access the BIOS settings. Press the specified key before the computer begins to load
its default operating system. If it begins loading the default OS before the BIOS is
started, shut down and reboot the computer.

Once in the BIOS area, change the boot order so that the system attempts to boot
from a USB drive prior to booting from the system’s internal hard drive. To do this,
look for the “Boot Priority” settings (or something similar) and change it to move
the “Kanguru USB drive” to position # 1 in the boot sequence. Save the changes, exit
the BIOS, and reboot if necessary. Additionally, there may be an option to select the
boot order. Set the boot order to boot to USB prior to booting to other media such as
hard disk, CD / DVD ROM, etc.

A few things to note about BIOS settings:

The BIOS may have 2 different areas which need to be changed to boot to the USB
drive.

1. Look for a setting area that indicates “Boot Priority”.

2. Also look for a setting/option that shows something similar to “Hard Disk

Drives”. This will show the drives that the BIOS system recognizes and will
also need to have the “Kanguru USB drive” or “USB Drive” placed in the # 1
position.

After saving and exiting the BIOS, the system should now boot from the RocIT Drive
inserted into the USB port. The settings should have been saved, however it has
been found that some computers require that the BIOS is reconfigured for
subsequent boots.

2.2.

Authentication Process

Once the BIOS settings have been properly configured, or if the computer
automatically boots directly from the RocIT Defender drive, the ViSoS Authenticator
screen will be displayed.