Dukane 8776-W - Manual (Page 6)

4
Fastening the lens cover
To avoid losing the lens cover, please fasten it the lens cap to the projector using
the strap.
. Fix the strap to the strap ring of the lens cover.
. Put the strap into the groove on the rivet.
3. Push the rivet into the strap hole.
Projector features / Preparations
Projector features
This projector is used to project various computer signals as well as NTSC/PAL/
SECAM, Component (SD, HD) video signals onto a screen. It requires just a little
space for installation and gets a large image from short distance.
 High Brightness
Newly developed 00W UHB (Ultra High Brightness) lamp gives you a
brighter
image on
the screen. The image is bright enough for use in fully lighted rooms.
 Low Noise
WHISPER mode is available for reducing acoustic noise
and quieter
operation. It is perfect for use in
dimly lighted rooms where low noise is more
important than brightness.
 Rich Connectivity
This projector has a variety of I/O ports. It can be easily connected to many
signal sources like PC, DVD and so on. The rich connectivity provides you
more options
for an impressive presentation.
 Compact Body
Even with its many features, this projector
has a small form factor.
Strap ring
Strap
Strap hole
Bottom side
Preparations