beautypg.com

Ivoclar Vivadent IPS e.max Abutment Solutions Cem Kit User Manual

Page 13

background image

13

After the auto-polymerization process, the glycerine gel is rinsed off with
water.

The cementation joint is cautiously polished with rubber polishers

at a low speed (< 5,000 rpm) to avoid overheating.

Any remaining cement residue in the screw channel is removed with suitable
rotating instruments. The base must not be damaged.

Completed hybrid abutment and hybrid abutment crown after cementation.

emax AbutSol_Cem_GI_WE1_649681_REV1.indd 13

10.10.13 15:40

This manual is related to the following products: