Ò³ãæ 10, Menu duration, Knob/button function introduction – ikan TL2000HD-CO User Manual
Page 10: Analogue adjust knobs, Bright
25
6
2
Analogue adjust knobs
1. BRIGHT
MENU
Press the
BRIGHT
knob to enter the main menu ,select the item and adjust
it based on your demand
Turn the
CONTRAST
knob to adjust the
CONTRAST
2. CONTRAST
VOL
Press the
CONTRAST
knob , then turn the knob to adjust the volume
4. SHARPNESS
PTP
Turn the
SHARPNESS
knob to adjust the
SHARPNESS
Gradually press the
SHARPNESS
knob to enter the
PIXEL TO PIXEL
mode,
screen display the original picture by scale 1:1 , the displaying order is : middle
upper left, upper right, lower left, lower right, press the knob again to exit the mode
Each knob has one indicator light on the upper left , when the value is the system
default (BRIGHTNESS :32, CONTRAST 32,SATURATION 32,SHARPNESS 0),
the indicator lightis green If the value deviate from the system default , the indicator
light is in red.
Adjust hint LED
3. SATURATION B/W
Turn the
SATURATION
knob to adjust the
SATURATION
Press the
SATURATION
knob to switch COLOR and B/W
3. ¿ ì ½ Ý ¼ ü
F1~F6 is the system default shortcut key , the functions as below
F1----WAVE FORM F2---- COLOR ONLY F3---- SCALING
F4---- MARK F5---- AUDIO DISPLAY F6----MARK ASPECT
Menu duration
SDI
After entering
System setting
interface, turn the knob to select
Menu
duration
.Then press the knob to enter
the Menu
duration
interface.
The original menuduration
30S
Press the (MENU) knob to enter the
main menu.
Turn the
BRIGHT
knob to select
System setting
.Then press the knob
to enter the
System setting
interfac.
D65
32
32
32
0
SDI
SDI
30S
SDI
30S
SDI
30S
Turn the (BRIGHT) knob to select
the required duration.press the knob to
confirm.
30S
Knob/Button function introduction
The former setup will be invalid after you set up the Fast Key for a new function,please
see to Page 12 for more setting about Short-cut Key.
Press the Short-cut Key repeatedly to cycle in the options.