IHSE USA 471 Series Repeater/Cross- Repeater - Manual (Page 7)

QUICK SETUP
Rev. : 09/25/2012
7
1. Quick Setup
This section briefly describes how to install your Repeater/Cross- Repeater system. Unless
you are an experienced user, we recommend that you follow the full procedures described in
the rest of this manual.
Install system
1. Connect Local unit to CPU or switch.
2. Connect Local unit to Repeater and Repeater to Remote Unit using
matching interconnection cable (CATx or Fiber)
3. Connect Remote unit to KVM.
4. Power up the system.
Done
YES
NO
Link LED
illuminated?
NO
YES
Check p.s.u.’s and connection
to power outlet
Power LED
illuminated?
Check the CATx/Fiber cable,
and CATx/Fiber connectors