IHSE USA 471 Series Repeater/Cross- Repeater - Manual (Page 19)

SERVICE SETUP
Rev. : 09/25/2012
19
Operating mode Dualhead Cross- Repeater
If you want to alter the mode of operation after the date of purchase, e.g. to use it as a
Dualhead Cross- Repeater, you need (probably) to install optical Transceiver (GBICs) and
reconfigure the device.
Operating mode JP1 JPA B
Dualhead Cross- Repeater Local CATx
Dualhead Cross- Repeater Remote CATx
4.2 installation instruction
Basically you need to pay attention to attach at connectors marked with
“A” only cables which link to a Local Unit and to attach at connectors
marked with „B“ only cables which link to a Remote Unit.
CATx or Fiber Repeater, Multimode/Singlemode Cross- Repeater
The Local Unit is connected via CATx (Fiber) connector A, the Remote Unit is connected via
CATx (Fiber) connector B.
Local
Unit
Remote
Unit