IHSE USA 471 Series Repeater/Cross- Repeater - Manual (Page 18)

REPEATER/CROSS- REPEATER
18
Rev. : 09/25/2012
4.1 Setup at the Repeater/Cross- Repeater
After unscrewing and opening the upper shell, please place the device in this orientation: with
the CATx/fiber connectors to the left and the Fiber connectors to the right (eventually not
equipped with GBICs).
The main PCB then will look like this:
Use the diagram to locate jumpers.
Operating mode Repeater or Cross- Repeater
If you want to alter the mode of operation after the date of purchase, e.g. from Repeater to
Cross- Repeater or vice versa, you need (probably) to install optical Transceiver (GBICs) and
reconfigure the device.
Operating Mode JP1 JPA B
Repeater or Fiber- Cross- Repeater
CATx/Fiber Cross- Repeater
JP1
JPA B